Cannon Mounting System
Tough and durable, Cannon mounts provide a variety of convenient ways to mount downriggers for flexibility and efficient trolling patterns.The information contained here will help you determine the optimum mounts for your particular units and needs.
Thru-deck mounting involves the use of a deck plate, often in combination with a swivel base or pedestal, to mount a downrigger.
Gimbal mounting, often used with a swivel base, eliminates drilling or other permanent mounting fixtures by using a boat's existing
metal flush-mount rod holder.
Clamp-type mount provides an alternative to thru-deck mounting, and includes a C-clamp base for thin-walled boats. Opens to 2 inches.
Rail/Side mount can be attached at the "T" joint of the rail to mount a downrigger to the side of the boat when gunwales won't accommodate deck plates or bases. Can fit round or square rails. Or can be bolted through the gunwale as a side mount.
|
Big Body Base |
Big Body Base 100% Heavy-duty LexanŽ. Strong and durable. Fits Magnum 10, Mag 20 DT, and DT IV. Part # 1007334 QC Price $25.99
|
Mid-Size Base |
Mid-Size Base 100% Heavy-duty LexanŽ. Strong and durable. Fits Uni-Troll. Part # 3307002 QC Price $21.99 |
|
Tab Lock Base
|
Tab Lock Base
Shown: Tab Lock base mounted to low-profile swivel base. |
|
Low Profile Swivel Base |
Low-Profile Swivel Base Heavy-duty LexanŽ and stainless steel swivel base. 1 1/8" tall. Six-point locking including two 45-degree positions. Measures 5" x 5" x 1 1/8". For all Cannon downriggers. Includes four 1/4" - 20 x 1 truss head screws Part # A-2207003 QC Price $72.99 Compare at Boat-US and West Marine at $99.99 |
|
Gimbal Mounts
|
Gimbal Mounts Simply slide the mount's gimbal tube into your boat's recessed holder. Once in place, you have a base ready to accept your downrigger. No holes to drill or changes to make on your boat. Removes easily by pulling up and out of rod holder.
12" Gimbal Part # A-2250928 QC Price $64.99 Compare at Boat-US and West Marine at $99.99 Shown: Gimbal mount in a flush mount rod holder supporting a low-profile swivel base and mounted downrigger. |
|
Deck Plate
|
Cannon Deck Plate Solid aluminum deck plate is drilled and tapped to fit only Cannon swivel bases, standard bases and pedestals. Often used as a backing plate for aluminum decks and unreinforced fiberglass decks or gunwales. Measures 6" x 5" x 1/2". Screws not included. Part # A-2200693 QC Price $32.99 Shown surface mounted, supporting a pedestal mount for bass boats and other boats with decks that require elevated mounting. |
|
Pedestal Mount |
Pedestal Mount Pedestals position downriggers just right. Easy to install on bass boats. Lets you raise downriggers to knee level for easier operation. Ideal when boat rails restrict normal mounting. Cut this 12" high pedestal to desired height. 12" ht. - Part # A-2200130 QC Price $71.99 Compare at Boat-US and West Marine at $99.99 Shown: Pedestal mount on a mounting plate with knobs (portability) with tab lock base and Easi-Troll 2 mounted. |
|
Rail/Side Mount
|
Rail/Side Mount Lets you secure your downrigger to the rail of your boat. No cutting or drilling necessary. Just clamp this aluminum mount to the rail and position your downrigger on the base. It can also be used to mount a downrigger to the side of your boat when gunwales won't accommodate deck plates or bases. Should be attached at the "T" joint of the rail. Part # A-2250940, QC Price $62.99 |
|
Clamp Mount
|
Clamp Mount Lets you mount your Cannon Sport-Troll, Easi-Troll or Mini-Mag downrigger on the gunwale or transom of your boat. Aluminum mount has a comfortable hand knob with heavy-duty coarse-thread screw that opens 2". This adds portability to your downriggers. Part # A-2207327 QC Price $59.99 |
|
Mounting Plate With Knobs |
Mounting Plate With Knobs For quick and easy removal and replacement of your pedestals, install a pre-tapped heavy duty aluminum mounting plate for each, then attach the pedestal, with four locking knobs. Great for mounting pedestal-based downriggers on bass boats. Mounting plate is through-bolted from the surface and pedestal mounts directly to the plate. Includes four locking knobs. Part # A-2200709 QC Price $59.99 |
